On Sat, 10 Sep 2011, Kirk Wallace wrote:
Date: Sat, 10 Sep 2011 13:23:09 -0700
From: Kirk Wallace <[email protected]>
Reply-To: "Enhanced Machine Controller (EMC)"
<[email protected]>
To: "Enhanced Machine Controller (EMC)" <[email protected]>
Subject: Re: [Emc-users] Foxconn motherboard
On Sat, 2011-09-10 at 11:54 -0500, Jon Elson wrote:
Viesturs L??cis wrote:
> So now both 7i43s work with both D525s and I have no idea, why did
> they change their mind.
>
Wow, that is a bit scary. If it had something to do with a wrong
parameter setting, then you should be fine. If not, then there's no
telling when it might fail again, and what you could do at that time
to fix it. Not the sort of thing that gives you confidence.
Jon
I have an ATSC TV tuner that gets and stays confused when the signals
get noisy and (maybe) writes bad data to memory (memory leaks?). I have
to leave the tuner unplugged for about a couple of hours or more before
the memory voltage will drain enough to start fresh. I seem to recall
that some point, communication was getting through to the 7i43's, but
not all. Maybe they got into a similar state. Is there a way to get the
7i43's to do a global reset?
There is no real state saved in the pre-config 7I43 so no reset is needed
This looks like a flaky cable issue to me...
--
Kirk Wallace
http://www.wallacecompany.com/machine_shop/
http://www.wallacecompany.com/E45/index.html
California, USA
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
------------------------------------------------------------------------------
Malware Security Report: Protecting Your Business, Customers, and the
Bottom Line. Protect your business and customers by understanding the
threat from malware and how it can impact your online business.
http://www.accelacomm.com/jaw/sfnl/114/51427462/
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
