Hi everyone, I installed new pci express card with two parallel ports, and I can't get any signal out of it. I am trying to connect it to two c10 boards which are working fine with mach. lspci -v feedback is: Communication controller: NetMos Technology PCI 9815 Multi-I/O Controller (rev 01)Subsystem: LSI Logic / Symbios Logic Device 0020Flags: medium devsel, IRQ 19I/O ports at cc00 [size=8]I/O ports at c880 [size=8]I/O ports at c800 [size=8]I/O ports at c480 [size=8]I/O ports at c400 [size=8]I/O ports at c080 [size=16]Kernel driver in use: parport_pcKernel modules: parport_pc
and cat /proc/ioports gives me: c000-cfff : PCI Bus 0000:03 c000-cfff : PCI Bus 0000:04 c080-c08f : 0000:04:00.0 c400-c407 : 0000:04:00.0 c480-c487 : 0000:04:00.0 c480-c482 : parport1 c800-c807 : 0000:04:00.0 c800-c802 : parport1 c880-c887 : 0000:04:00.0 c880-c882 : parport0 cc00-cc07 : 0000:04:00.0 cc00-cc02 : parport0 So I also ran trough addresses and the one without error messages on start-up are c000, c800, c400, but still no signal from card. I checked with multimeter, signals on pins assigned for steppers direction which I guess it should be measurable change when jogging in one or another direction. Tried with inverting signals also with no luck. Is there something I missed on start, because what I did is just insert card into the free pci-e slot? Thank you,Regards! ------------------------------------------------------------------------------ Write once. Port to many. Get the SDK and tools to simplify cross-platform app development. Create new or port existing apps to sell to consumers worldwide. Explore the Intel AppUpSM program developer opportunity. appdeveloper.intel.com/join http://p.sf.net/sfu/intel-appdev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users