Dear Jon, Thanks for your reply. The machine and workpiece coordinates are called Machine and Relative positions. I am talking about the Actual and Commanded positions which you can choose with the @ key. The problem is that the commanded position is not right, but the actual position is correct. I was looking for an interface from emc.stat which can show the correct commanded position. Farzin
On Sun, Jan 8, 2012 at 10:00 PM, Jon Elson <el...@pico-systems.com> wrote: > Farzin Kamangar wrote: > > Dear EMC users, > > I was wondering how I could get the commanded positions, meaning the > > commanded positions from Gcode, and show them on the GUI. > The @ key toggles between commanded and actual position display on the > 3D window's > DRO values. The # key toggles between machine and workpiece coordinate > systems. > > Or, maybe that is not what you are asking for. > > Jon > > > ------------------------------------------------------------------------------ > Ridiculously easy VDI. With Citrix VDI-in-a-Box, you don't need a complex > infrastructure or vast IT resources to deliver seamless, secure access to > virtual desktops. With this all-in-one solution, easily deploy virtual > desktops for less than the cost of PCs and save 60% on VDI infrastructure > costs. Try it free! http://p.sf.net/sfu/Citrix-VDIinabox > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Ridiculously easy VDI. With Citrix VDI-in-a-Box, you don't need a complex infrastructure or vast IT resources to deliver seamless, secure access to virtual desktops. With this all-in-one solution, easily deploy virtual desktops for less than the cost of PCs and save 60% on VDI infrastructure costs. Try it free! http://p.sf.net/sfu/Citrix-VDIinabox _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users