2012/1/20 Kirk Wallace <kwall...@wallacecompany.com>: > On Fri, 2012-01-20 at 10:39 -0800, Kirk Wallace wrote: >> On Fri, 2012-01-20 at 10:42 +0200, Viesturs Lācis wrote: >> ... snip >> > Kirk, I repasted Your scheme here: >> > http://picpaste.com/scheme-3V0w43QM.png > ... snip > > Revised schematic attached.
Pasted the scheme here: http://picpaste.com/pics/Screenshot-M9n1LIG0.1327503833.png R1 is 100 ohm, R2 is 220 ohm. R3 is 10K ohm. No diode next to R1. I tested by connecting/disconnecting 4N25 pin1 to GND and measured the voltage on laser power pins. Conclusion - not working. I have 0V on output in both cases. Any ideas, what might be wrong? Can I short-wire +5V to pin4 of 4N25 to test, if it works then? That way I intend to check, if 4N25 is good or no. Viesturs ------------------------------------------------------------------------------ Keep Your Developer Skills Current with LearnDevNow! The most comprehensive online learning library for Microsoft developers is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3, Metro Style Apps, more. Free future releases when you subscribe now! http://p.sf.net/sfu/learndevnow-d2d _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users