the ballbearings! at least one of the wheels does not run perfectly parallel to the other wheel anymore. (my logical reasoning wife will now tell me I cocked up that sentence, bt never mind)
j. On Thu, Feb 16, 2012 at 9:22 PM, dave <[email protected]> wrote: > > Hi all, > > I have a cheapie horizontal bandsaw that has performed decently well > for 10 years or so and just recently started sheddinga the blade after a > few turns. > > As far as I can tell the blade works its way off the non-driven wheel. > I suspect the guides (ball bearings) are at fault but will entertain > other reasonable ideas. > > What am I missing? > > Thanks in advance. > > Dave > > > ------------------------------------------------------------------------------ > Virtualization & Cloud Management Using Capacity Planning > Cloud computing makes use of virtualization - but cloud computing > also focuses on allowing computing to be delivered as a service. > http://www.accelacomm.com/jaw/sfnl/114/51521223/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
