Don Stanley wrote: > Hi All; > I just assembled my new D525MW computer system. > When I apply power to the system the D525MW powers up > for two seconds then powers down again. > I built a little circuit for the D510MO to do this. You need to find out which power switch pin is the signal and which one is grounded. Connect a small NPN transistor with the emitter to the ground pin and the collector to the signal pin. Connect the base to a 10 K resistor, and then to a 22 uF electrolytic capacitor. Connect that to the +12 V supply (+5 V might also work). I used it with a pico-PSU that runs the computer off a 12 V supply. It might work a little differently with a line-power supply.
Jon ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
