Steve, Interesting! Can I upgrade from 2.4.3 to 2.4.6 if I originally installed from the LiveCD (10.04)? I currently see a bunch of potential updates appear in the Update Manager window when I start my system, but I was afraid to install them. If I do install them, will that get me up to 2.4.6?
Thanks. Tony ----- Original Message ----- From: "Steve Blackmore" <st...@pilotltd.net> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Sent: Sunday, March 18, 2012 5:23 AM Subject: Re: [Emc-users] Tool change question > On Sat, 17 Mar 2012 20:22:09 -0400, you wrote: > >>Also, you mentioned you had to press Alt-TAB to change focus. I found >>all I had to do, after the tool change dialog box appeared, was to click >>anywhere in the EMC window, and it picked up focus. Then I could jog, >>touch off, etc. And I didn't have to press F2 afterwards. > > Not had to edit it at all here, I'm running 2.4.6 > > When tool change pop up appears you do have to click on EMC window to > get focus, you can then jog etc. Once done all I need to do is click on > the tool change pop up and file continues. > > Maybe it's going to need some tweaking for 2.5? > > Steve Blackmore > -- > > ------------------------------------------------------------------------------ > This SF email is sponsosred by: > Try Windows Azure free for 90 days Click Here > http://p.sf.net/sfu/sfd2d-msazure > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ This SF email is sponsosred by: Try Windows Azure free for 90 days Click Here http://p.sf.net/sfu/sfd2d-msazure _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users