On 03/20/2012 04:47 PM, Kirk Wallace wrote: > it has the the M00 pauses and when I hit Esc, it exits the current > program run, so I would need to do a run from line (as I see you > mentioned above) on a new program run in order to "resume". If I had > several tool changes to do, this could get tricky, especially after > working twelve hour shifts, six days a week for three months (been > there) or after doing nothing on any CNC for several months and getting > a rush job (done that). Your method seems reasonable, but I'll need to > play with it some more to get a better understanding of how well it > works with different situations such as with conditional codes and other > "run from line" problems. Thanks for the tip Terry.
One could include the "message to operator" construct: (MSG, bla bla bla) in the g-code to prompt the operator to do the right thing. Karl ------------------------------------------------------------------------------ This SF email is sponsosred by: Try Windows Azure free for 90 days Click Here http://p.sf.net/sfu/sfd2d-msazure _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
