OK, they must have had the Simoreg in a different configuration back then. The Simoreg drive I have is a standalone unit and it has a small 7 segement led display with a few keys to select parameters and change them.
Dave On 4/16/2012 1:29 AM, Roger Holmquist wrote: > 16 apr 2012 kl. 03:38 skrev emc-users-requ...@lists.sourceforge.net: > > >> Is there a small keyboard on that Spindle drive with some led >> displays? >> >> > Thanks for your response Dave! > > I don't think i have any such devices, there is some LED-lights but > no displays on some cards and no visible keyboard. > Where should it be situated, on one of the PCBs? > > The PCB-cards are stacked in a foldable rack interconnected with some > flatcables, very servicefriendly. > Included in ths rack are the thyristors for the spindle engine and > maybe X and Z motors, I haven't checked that part up yet. > > Nor can I do it this week but I guess next, have some other buinesses > to handle! > On the other hand I have all the schematics and PCB-layouts > available for the motor drive system. > > / Roger > > ------------------------------------------------------------------------------ > For Developers, A Lot Can Happen In A Second. > Boundary is the first to Know...and Tell You. > Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! > http://p.sf.net/sfu/Boundary-d2dvs2 > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
