On 17 May 2012 08:02, Speaker To-Dirt <speaker_2_d...@yahoo.com> wrote:
> I'm running EMC2 v2.3.5 on Ubuntu 8.04. Yes it's obsolete > but the atom board on my mill won't run under Lucid (10.04). You can run 2.5 (and master) on 8.04. LinuxCNC versions are not linked to Ubuntu versions. > M6 T1 > > G00 X0.000 Y0.000 Z1.000 > > G00 X-1.000 Y1.000 ; <--- Axis complains this is an invlid lead in. > > G41 > > G01 Z0.000 > > G01 X-0.088 Y0.499 EMC2 isn't desperately good at reporting line numbers correctly. I wonder if the problem is the lines after the G41? The G1 Z0 move might be being interpreted as the lead-in move, and there is no XY movement, so to lead-in. This is speculation, though, I have hardly used G41/42 -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users