>I never use the H-number, it is only useful for applying the offset of It may be not useful in LinuxCNC but I guarentee you 90% + of the mill programs in the world use it (Fanuc has to have it) also the Dxx If you omit the D on Fanuc no offset will be applied to G41,G42
Terry ----- Original Message ----- From: andy pugh <bodge...@gmail.com> To: Enhanced Machine Controller (EMC) <emc-users@lists.sourceforge.net> Cc: Sent: Monday, May 21, 2012 5:57 PM Subject: Re: [Emc-users] Tool Offsets On 21 May 2012 20:51, Eric H. Johnson <ejohn...@camalytics.com> wrote: > T3 M6 > G43 H3 I never use the H-number, it is only useful for applying the offset of a non-loaded tool to the loaded tool. Though I doubt that is your problem. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users