Chris M,
1- I tested Latency , and put the number in wizard 2- yes I tested the Axis but they didn't move in this test !! 3- I woud like the parallel port signal but I don't know how I could test it I used the original Ubuntu EMC 2 that Sherline send with their driver box , normally it set for mill and lathe and this company don't send a wrong software . If you know or you have a solution for test and set the parallel port pin , please let me know . Parviz -----Original Message----- From: Chris Morley [mailto:chrisinnana...@hotmail.com] Sent: Monday, June 25, 2012 12:36 AM To: EMC Subject: [Emc-users] FW: Sherline Mill 5410 and EMC2 From: chrisinnana...@hotmail.com To: s...@highlab.com Subject: RE: [Emc-users] Sherline Mill 5410 and EMC2 Date: Sun, 24 Jun 2012 20:04:03 +0000 > Date: Sun, 24 Jun 2012 11:54:44 -0600 > From: s...@highlab.com > To: emc-users@lists.sourceforge.net > Subject: Re: [Emc-users] Sherline Mill 5410 and EMC2 > > On 06/24/2012 11:00 AM, Robot Abzar Team wrote: > > I purchased a 5410 cnc-ready with 8760 driver box . and try to make the > > configuration by myself , > > Is there a reason you don't want to you use the known-good Sherline > config that ships with LinuxCNC? It might at the very least be a good > starting place for customization. > > > -- > Sebastian Kuzminsky > Well how he got a config matters little if the underlying problem is say the parallel port or realtime. Did you do a latency test? When using the stepconfig program did you try the stepper test? Did it work? Can use see if the parallel port is outputting _any_ signals? I few general things come to mind: -you don't have the realtime version of linuxcnc - but the stepper test would have failed. -your parallel port address is wrong. the stepper test is your benchmark - if it doesn't move in the step test, it won't move anywhere else. (though the opossite is not necessarily true!) Chris M ---------------------------------------------------------------------------- -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
