2012/6/26 Michael Haberler <mai...@mah.priv.at>: > use this example for now: > http://git.mah.priv.at/gitweb/emc2-dev.git/shortlog/refs/heads/spinbutton-workaround > > I'll eventually push it to v2.5_branch
Thank You for Your effort, but I did not get it right. Anyway, it does not really matter - it was just for my own learning purposes, to get at least some understanding, how to create a glade vcp and also to test a kinematics module - I wanted it to display joint positions so that I could compare them with axes positions and then see, if it matches the expected result or is it going in some totally different direction. BTW, I looked here: http://www.linuxcnc.org/docs/2.5/html/gui/gladevcp.html#gladevcp:Prerequisites It says that the version number should be greater than 3.6.7 I have 3.6.7 and I have all the updates installed. Is it a mistake and the page should say "at least 3.6.7" or am I really supposed to get newer packages? -- Viesturs If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
