Hi, in dmesg i get following text:
[ 0.450028] libata version 3.00 loaded. [ 0.450028] usbcore: registered new interface driver usbfs [ 0.450028] usbcore: registered new interface driver hub [ 0.450028] usbcore: registered new device driver usb [ 0.450028] ACPI: WMI: Mapper loaded [ 0.450028] PCI: Using ACPI for IRQ routing [ 0.450028] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff] [ 0.450028] pci 0000:00:00.0: BAR 3: can't allocate resource [ 0.450028] NetLabel: Initializing [ 0.450028] NetLabel: domain hash size = 128 [ 0.450028] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.450028] NetLabel: unlabeled traffic allowed by default [ 0.450028] Switching to clocksource tsc [ 0.450028] AppArmor: AppArmor Filesystem Enabled [ 0.450028] pnp: PnP ACPI init [ 0.450028] ACPI: bus type pnp registered [ 0.450553] pnp 00:0b: mem resource (0xcf800-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.450555] pnp 00:0b: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.450557] pnp 00:0b: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.450559] pnp 00:0b: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.450561] pnp 00:0b: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.450563] pnp 00:0b: mem resource (0x100000-0xcfdeffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.450618] pnp: PnP ACPI: found 12 devices [ 0.450619] ACPI: ACPI bus type pnp unregistered [ 0.450621] PnPBIOS: Disabled by ACPI PNP [ 0.450627] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.450628] system 00:01: ioport range 0x220-0x225 has been reserved [ 0.450630] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.450633] system 00:02: ioport range 0x4100-0x411f has been reserved [ 0.450635] system 00:02: ioport range 0x228-0x22f has been reserved [ 0.450637] system 00:02: ioport range 0x40b-0x40b has been reserved [ 0.450639] system 00:02: ioport range 0x4d6-0x4d6 has been reserved [ 0.450640] system 00:02: ioport range 0xc00-0xc01 has been reserved [ 0.450642] system 00:02: ioport range 0xc14-0xc14 has been reserved [ 0.450644] system 00:02: ioport range 0xc50-0xc52 has been reserved [ 0.450645] system 00:02: ioport range 0xc6c-0xc6d has been reserved [ 0.450647] system 00:02: ioport range 0xc6f-0xc6f has been reserved [ 0.450649] system 00:02: ioport range 0xcd0-0xcd1 has been reserved [ 0.450650] system 00:02: ioport range 0xcd2-0xcd3 has been reserved [ 0.450652] system 00:02: ioport range 0xcd4-0xcdf has been reserved [ 0.450654] system 00:02: ioport range 0x4000-0x40fe has been reserved [ 0.450655] system 00:02: ioport range 0x4210-0x4217 has been reserved [ 0.450657] system 00:02: ioport range 0xb00-0xb0f has been reserved [ 0.450659] system 00:02: ioport range 0xb10-0xb1f has been reserved [ 0.450661] system 00:02: ioport range 0xb20-0xb3f has been reserved [ 0.450665] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 0.450668] system 00:0b: iomem range 0xcfdf0000-0xcfdfffff could not be reserved [ 0.450670] system 00:0b: iomem range 0xffff0000-0xffffffff has been reserved [ 0.450672] system 00:0b: iomem range 0xcfe00000-0xcfefffff has been reserved [ 0.450674] system 00:0b: iomem range 0xcff00000-0xcfffffff could not be reserved [ 0.450676] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.450678] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.450680] system 00:0b: iomem range 0xfff80000-0xfffeffff has been reserved [ 0.485274] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 0.485276] pci 0000:00:02.0: IO window: 0xe000-0xefff [ 0.485278] pci 0000:00:02.0: MEM window: 0xfdd00000-0xfddfffff [ 0.485280] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.485284] pci 0000:00:14.4: PCI bridge, secondary bus 0000:02 [ 0.485286] pci 0000:00:14.4: IO window: 0xd000-0xdfff [ 0.485291] pci 0000:00:14.4: MEM window: 0xfdf00000-0xfdffffff [ 0.485294] pci 0000:00:14.4: PREFETCH window: 0xfde00000-0xfdefffff [ 0.485304] alloc irq_desc for 18 on node -1 [ 0.485305] alloc kstat_irqs on node -1 [ 0.485312] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.485315] pci 0000:00:02.0: setting latency timer to 64 [ 0.485322] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.485323] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.485325] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.485327] pci_bus 0000:01: resource 1 mem: [0xfdd00000-0xfddfffff] [ 0.485329] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.485330] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.485332] pci_bus 0000:02: resource 1 mem: [0xfdf00000-0xfdffffff] [ 0.485333] pci_bus 0000:02: resource 2 pref mem [0xfde00000-0xfdefffff] [ 0.485335] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.485336] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.485360] NET: Registered protocol family 2 [ 0.485425] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.485639] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.485981] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.486151] TCP: Hash tables configured (established 131072 bind 65536) [ 0.486153] TCP reno registered [ 0.486209] NET: Registered protocol family 1 [ 0.525489] pci 0000:01:00.0: Boot video device [ 0.525705] Scanning for low memory corruption every 60 seconds [ 0.525764] audit: initializing netlink socket (disabled) [ 0.525772] type=2000 audit(1344858186.525:1): initialized [ 0.530285] highmem bounce pool size: 64 pages [ 0.530288] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.531143] VFS: Disk quotas dquot_6.5.2 [ 0.531175] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.531490] fuse init (API version 7.13) [ 0.531535] msgmni has been set to 1647 [ 0.531708] alg: No test for stdrng (krng) [ 0.531743] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.531745] io scheduler noop registered [ 0.531746] io scheduler anticipatory registered [ 0.531748] io scheduler deadline registered [ 0.531770] io scheduler cfq registered (default) [ 0.531847] alloc irq_desc for 24 on node -1 [ 0.531848] alloc kstat_irqs on node -1 [ 0.531854] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X [ 0.531858] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.531897] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.531910] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.531948] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.531951] ACPI: Power Button [PWRB] [ 0.531984] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.531985] ACPI: Power Button [PWRF] [ 0.532043] isapnp: Scanning for PnP cards... [ 0.532697] hpet_acpi_add: no address or irqs in _CRS [ 0.532725] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.532822] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.533053] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.533616] brd: module loaded [ 0.533858] loop: module loaded [ 0.533900] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.533969] alloc irq_desc for 16 on node -1 [ 0.533970] alloc kstat_irqs on node -1 [ 0.533978] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.534158] Fixed MDIO Bus: probed [ 0.534177] PPP generic driver version 2.4.2 [ 0.534193] tun: Universal TUN/TAP device driver, 1.6 [ 0.534194] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com> [ 0.534235] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.534246] alloc irq_desc for 17 on node -1 [ 0.534247] alloc kstat_irqs on node -1 [ 0.534253] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.534261] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 0.534277] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 0.534299] ehci_hcd 0000:00:12.2: debug port 1 [ 0.534324] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 [ 0.541462] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 0.541522] usb usb1: configuration #1 chosen from 1 choice [ 0.541538] hub 1-0:1.0: USB hub found [ 0.541543] hub 1-0:1.0: 6 ports detected [ 0.541585] alloc irq_desc for 19 on node -1 [ 0.541587] alloc kstat_irqs on node -1 [ 0.541594] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.541602] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 0.541623] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 0.541644] ehci_hcd 0000:00:13.2: debug port 1 [ 0.541669] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 [ 0.549460] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.549516] usb usb2: configuration #1 chosen from 1 choice [ 0.549530] hub 2-0:1.0: USB hub found [ 0.549534] hub 2-0:1.0: 6 ports detected [ 0.549577] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.549588] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.549597] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 0.549615] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 0.549640] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 [ 0.581518] usb usb3: configuration #1 chosen from 1 choice [ 0.581535] hub 3-0:1.0: USB hub found [ 0.581543] hub 3-0:1.0: 3 ports detected [ 0.581582] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.581594] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 0.581614] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 0.581630] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 [ 0.613516] usb usb4: configuration #1 chosen from 1 choice [ 0.613533] hub 4-0:1.0: USB hub found [ 0.613541] hub 4-0:1.0: 3 ports detected [ 0.613581] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.613595] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.613614] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 0.613644] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 [ 0.627822] Freeing initrd memory: 12833k freed [ 0.645533] usb usb5: configuration #1 chosen from 1 choice [ 0.645554] hub 5-0:1.0: USB hub found [ 0.645562] hub 5-0:1.0: 3 ports detected [ 0.645600] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.645612] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 0.645633] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 0.645648] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 [ 0.677525] usb usb6: configuration #1 chosen from 1 choice [ 0.677541] hub 6-0:1.0: USB hub found [ 0.677548] hub 6-0:1.0: 3 ports detected [ 0.677583] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.677592] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 0.677610] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 0.677623] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 [ 0.701467] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 0.709498] usb usb7: configuration #1 chosen from 1 choice [ 0.709512] hub 7-0:1.0: USB hub found [ 0.709519] hub 7-0:1.0: 2 ports detected [ 0.709552] uhci_hcd: USB Universal Host Controller Interface driver [ 0.709600] PNP: No PS/2 controller found. Probing ports directly. [ 0.743322] Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 0.743324] If AUX port is really absent please use the 'i8042.noaux' option. [ 0.795570] usb 1-2: configuration #1 chosen from 1 choice [ 0.869544] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.869597] mice: PS/2 mouse device common for all mice [ 0.869657] rtc_cmos 00:05: RTC can wake from S4 [ 0.869679] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.869703] rtc0: alarms up to one month, 242 bytes nvram [ 0.869761] device-mapper: uevent: version 1.0.3 [ 0.869845] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-de...@redhat.com [ 0.869929] device-mapper: multipath: version 1.1.0 loaded [ 0.869931] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.869999] EISA: Probing bus 0 at eisa.0 [ 0.870014] Cannot allocate resource for EISA slot 4 [ 0.870028] EISA: Detected 0 cards. [ 0.870030] cpuidle: using governor ladder [ 0.870031] cpuidle: using governor menu [ 0.870271] TCP cubic registered [ 0.870358] NET: Registered protocol family 10 [ 0.870614] lo: Disabled Privacy Extensions [ 0.870789] NET: Registered protocol family 17 [ 0.870803] Using IPI No-Shortcut mode [ 0.870846] registered taskstats version 1 [ 0.871118] rtc_cmos 00:05: setting system clock to 2012-08-13 11:43:08 UTC (1344858188) [ 0.871120] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.871121] EDD information not available. [ 0.885709] isapnp: No Plug & Play device found [ 0.885724] Freeing unused kernel memory: 620k freed [ 0.885894] Write protecting the kernel text: 4540k [ 0.885912] Write protecting the kernel read-only data: 1668k [ 0.896390] udev: starting version 151 [ 0.909443] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 0.915247] scsi0 : pata_atiixp [ 0.919134] Floppy drive(s): fd0 is 1.44M [ 0.922476] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 0.922488] 8139cp 0000:02:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 0.924709] scsi1 : pata_atiixp [ 0.925503] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 0.925505] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 0.926286] ahci 0000:00:11.0: version 3.0 [ 0.926299] alloc irq_desc for 22 on node -1 [ 0.926300] alloc kstat_irqs on node -1 [ 0.926308] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.926404] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 0.926407] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 0.929212] scsi2 : ahci [ 0.929543] FDC 0 is a post-1991 82077 [ 0.930893] scsi3 : ahci [ 0.932127] 8139too Fast Ethernet driver 0.9.28 [ 0.932150] alloc irq_desc for 20 on node -1 [ 0.932152] alloc kstat_irqs on node -1 [ 0.932160] 8139too 0000:02:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.933230] eth0: RealTek RTL8139 at 0xde00, 00:e0:4c:17:c3:98, IRQ 20 [ 0.933954] scsi4 : ahci [ 0.934033] scsi5 : ahci [ 0.934111] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 0.934114] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 0.934116] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 0.934119] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 1.463890] usb 2-1: configuration #1 chosen from 1 choice [ 1.696090] ata5: SATA link down (SStatus 0 SControl 300) [ 1.728080] usb 3-3: new low speed USB device using ohci_hcd and address 2 [ 1.860104] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.860128] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.860145] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.862069] ata6.00: ATAPI: Optiarc DVD RW AD-7241S, 1.03, max UDMA/100, ATAPI AN [ 1.862134] ata3.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133 [ 1.862136] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.863311] ata3.00: configured for UDMA/133 [ 1.864043] ata4.00: ATA-8: WDC WD15EARS-22Z5B1, 80.00A80, max UDMA/133 [ 1.864045] ata4.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.864250] ata6.00: configured for UDMA/100 [ 1.868035] ata4.00: configured for UDMA/133 [ 1.876129] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5 [ 1.876211] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.876254] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.876281] sd 2:0:0:0: [sda] Write Protect is off [ 1.876283] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.876294] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.876369] sda: [ 1.884153] scsi 3:0:0:0: Direct-Access ATA WDC WD15EARS-22Z 80.0 PQ: 0 ANSI: 5 [ 1.884229] sd 3:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 1.884231] sd 3:0:0:0: [sdb] 4096-byte physical blocks [ 1.884241] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 1.884255] sd 3:0:0:0: [sdb] Write Protect is off [ 1.884259] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.884297] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.884368] sdb: [ 1.885532] scsi 5:0:0:0: CD-ROM Optiarc DVD RW AD-7241S 1.03 PQ: 0 ANSI: 5 [ 1.889897] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.889899] Uniform CD-ROM driver Revision: 3.20 [ 1.889953] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 1.889988] sr 5:0:0:0: Attached scsi generic sg2 type 5 [ 1.891033] sda1 sda2 [ 1.891181] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.898412] usb 3-3: configuration #1 chosen from 1 choice [ 1.906168] usbcore: registered new interface driver hiddev [ 1.906351] sdb1 sdb2 < [ 1.911494] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input3 [ 1.911534] generic-usb 0003:046D:C316.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:12.0-3/input0 [ 1.921988] sdb5 [ 1.922367] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/input/input4 [ 1.922406] generic-usb 0003:046D:C316.0002: input,hidraw1: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:12.0-3/input1 [ 1.922417] usbcore: registered new interface driver usbhid [ 1.922418] usbhid: v2.6:USB HID core driver [ 1.942743] sdb6 > [ 1.942924] sd 3:0:0:0: [sdb] Attached SCSI disk [ 1.944526] ohci1394 0000:02:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.945150] vga16fb: initializing [ 1.945152] vga16fb: mapped to 0xc00a0000 [ 1.945179] fb0: VGA16 VGA frame buffer device [ 2.000816] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fdffe000-fdffe7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 2.067792] Console: switching to colour frame buffer device 80x30 [ 2.164075] usb 4-1: new low speed USB device using ohci_hcd and address 2 [ 2.333374] usb 4-1: configuration #1 chosen from 1 choice [ 2.341425] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input5 [ 2.341471] generic-usb 0003:046D:C046.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.1-1/input0 [ 3.067924] xor: automatically using best checksumming function: pIII_sse [ 3.083993] pIII_sse : 13673.000 MB/sec [ 3.083995] xor: using function: pIII_sse (13673.000 MB/sec) [ 3.085482] device-mapper: dm-raid45: initialized v0.2594b [ 3.272140] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00bfed08006cf049] [ 3.406151] EXT4-fs (sdb5): mounted filesystem with ordered data mode [ 5.185045] Adding 9822200k swap on /dev/sdb6. Priority:-1 extents:1 across:9822200k [ 6.094175] udev: starting version 151 [ 6.863806] type=1505 audit(1344850994.488:2): operation="profile_load" pid=594 name="/sbin/dhclient3" [ 6.863977] type=1505 audit(1344850994.488:3): operation="profile_load" pid=594 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 6.864104] type=1505 audit(1344850994.492:4): operation="profile_load" pid=594 name="/usr/lib/connman/scripts/dhclient-script" [ 7.420418] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04E8 pid 0x341B [ 7.420436] usbcore: registered new interface driver usblp [ 7.426359] Linux agpgart interface v0.103 [ 7.452493] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f] [ 7.452495] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.870685] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 7.870688] Disabling lock debugging due to kernel taint [ 7.889107] lp: driver loaded but no devices found [ 7.953766] [fglrx] Maximum main memory to use for locked dma buffers: 3124 MBytes. [ 7.953798] [fglrx] vendor: 1002 device: 68b8 count: 1 [ 7.953986] [fglrx] ioport: bar 4, base 0xee00, size: 0x100 [ 7.953997] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 7.954000] pci 0000:01:00.0: setting latency timer to 64 [ 7.954181] [fglrx] Kernel PAT support is enabled [ 7.954193] [fglrx] module loaded - fglrx 8.72.11 [Apr 8 2010] with 1 minors [ 8.119069] Slow work thread pool: Starting up [ 8.119162] Slow work thread pool: Ready [ 8.119256] CIFS: Unknown mount option codepage [ 8.119258] CIFS: Unknown mount option unicode [ 8.270959] CIFS VFS: Error connecting to socket. Aborting operation [ 8.270963] CIFS VFS: cifs_mount failed w/return code = -101 [ 9.286046] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.492887] type=1505 audit(1344850997.121:5): operation="profile_replace" pid=897 name="/sbin/dhclient3" [ 9.493066] type=1505 audit(1344850997.121:6): operation="profile_replace" pid=897 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 9.493167] type=1505 audit(1344850997.121:7): operation="profile_replace" pid=897 name="/usr/lib/connman/scripts/dhclient-script" [ 9.566536] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 9.566558] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 9.574594] type=1505 audit(1344850997.201:8): operation="profile_load" pid=896 name="/usr/share/gdm/guest-session/Xsession" [ 9.585019] type=1505 audit(1344850997.213:9): operation="profile_load" pid=901 name="/usr/sbin/tcpdump" [ 10.093258] type=1505 audit(1344850997.721:10): operation="profile_load" pid=900 name="/usr/lib/cups/backend/cups-pdf" [ 10.093474] type=1505 audit(1344850997.721:11): operation="profile_load" pid=900 name="/usr/sbin/cupsd" [ 11.791088] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 12.298911] ppdev: user-space parallel port driver [ 13.933007] CIFS: Unknown mount option codepage [ 13.933010] CIFS: Unknown mount option unicode [ 14.119151] alloc irq_desc for 25 on node -1 [ 14.119153] alloc kstat_irqs on node -1 [ 14.119161] pci 0000:01:00.0: irq 25 for MSI/MSI-X [ 14.119605] [fglrx] Firegl kernel thread PID: 1228 [ 14.119804] [fglrx] IRQ 25 Enabled [ 14.589082] usb 1-2: usbfs: interface 1 claimed by usblp while 'usb' sets config #1 [ 15.199385] CPU0 attaching NULL sched-domain. [ 15.199389] CPU1 attaching NULL sched-domain. [ 15.199391] CPU2 attaching NULL sched-domain. [ 15.199392] CPU3 attaching NULL sched-domain. [ 15.280053] CPU0 attaching sched-domain: [ 15.280056] domain 0: span 0-3 level MC [ 15.280058] groups: 0 1 2 3 [ 15.280062] CPU1 attaching sched-domain: [ 15.280063] domain 0: span 0-3 level MC [ 15.280065] groups: 1 2 3 0 [ 15.280068] CPU2 attaching sched-domain: [ 15.280069] domain 0: span 0-3 level MC [ 15.280071] groups: 2 3 0 1 [ 15.280074] CPU3 attaching sched-domain: [ 15.280075] domain 0: span 0-3 level MC [ 15.280076] groups: 3 0 1 2 [ 15.589574] [fglrx] Gart USWC size:1022 M. [ 15.589577] [fglrx] Gart cacheable size:405 M. [ 15.589581] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 15.589583] [fglrx] Reserved FB block: Unshared offset:f9cb000, size:335000 [ 15.589584] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 [ 20.426424] CPU0 attaching NULL sched-domain. [ 20.426428] CPU1 attaching NULL sched-domain. [ 20.426430] CPU2 attaching NULL sched-domain. [ 20.426432] CPU3 attaching NULL sched-domain. [ 20.460335] CPU0 attaching sched-domain: [ 20.460338] domain 0: span 0-3 level MC [ 20.460340] groups: 0 1 2 3 [ 20.460345] CPU1 attaching sched-domain: [ 20.460347] domain 0: span 0-3 level MC [ 20.460348] groups: 1 2 3 0 [ 20.460351] CPU2 attaching sched-domain: [ 20.460353] domain 0: span 0-3 level MC [ 20.460354] groups: 2 3 0 1 [ 20.460357] CPU3 attaching sched-domain: [ 20.460358] domain 0: span 0-3 level MC [ 20.460359] groups: 3 0 1 2 [ 22.671869] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 22.768530] eth0: no IPv6 routers present [ 65.510628] I-pipe: Domain RTAI registered. [ 65.510633] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03. [ 65.510634] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) . [ 65.510717] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 65.510718] PIPELINE layers: [ 65.510720] f8bf1e20 9ac15d93 RTAI 200 [ 65.510721] c085cb20 0 Linux 100 [ 65.525403] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>. [ 65.525541] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes. [ 65.525544] RTAI[sched]: hard timer type/freq = APIC/12554665(Hz); default timing: periodic; linear timed lists. [ 65.525546] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3415448000 hz. [ 65.525547] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 65.525590] RTAI[usi]: enabled. [ 65.542535] RTAI[math]: loaded. [ 68.463216] RTAI[math]: unloaded. [ 68.471266] SCHED releases registered named ALIEN RTGLBH [ 68.532191] RTAI[malloc]: unloaded. [ 68.632236] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 68.633784] I-pipe: Domain RTAI unregistered. [ 68.633887] RTAI[hal]: unmounted. [ 92.654654] I-pipe: Domain RTAI registered. [ 92.654658] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03. [ 92.654660] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) . [ 92.654733] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 92.654735] PIPELINE layers: [ 92.654736] fa899e20 9ac15d93 RTAI 200 [ 92.654738] c085cb20 0 Linux 100 [ 92.675517] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>. [ 92.675673] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes. [ 92.675676] RTAI[sched]: hard timer type/freq = APIC/12554665(Hz); default timing: periodic; linear timed lists. [ 92.675678] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3415448000 hz. [ 92.675680] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 92.675725] RTAI[usi]: enabled. [ 264.582764] lo: Disabled Privacy Extensions [ 401.362816] lo: Disabled Privacy Extensions Br. Klemen On Mon, Aug 13, 2012 at 11:58 AM, andy pugh <bodge...@gmail.com> wrote: > On 13 August 2012 09:52, Klemen Ozebek <klemen.oze...@gmail.com> wrote: > > > in terminal window i get following text without any values: > > This is possibly an issue that the RTAI folks would be more > knowledgeable about. The problem lies outside of LinuxCNC. > Do you see anything in dmesg after trying the text-mode latency test? > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
