2012/8/20 Joe Spanier <bmxsk8e...@yahoo.com>: > Hey Guys, > Im working on converting my mill to cnc and am specing out the PC. I'm > thinking of building a new computer this time rather then running an old > closet computer and am looking at the mini-ITX atom boards. Do any of you > have any recommmendations for cheaper boards that you know run well with low > latency? I am looking at this board now, > http://www.newegg.com/Product/Product.aspx?Item=N82E16813128452. Also is the > onboard graphics good enough with these or do I need to look into adding a > video card too.
I am using Intel D525MW mini-ITX boards in my machines. It has the same chipset and CPU, but strangely enough - passive CPU cooling, without fan. It has pretty good latency numbers - below 10K ns, some users are reporting even 3-5K ns latency numbers with hyperthreading disabled in BIOS and with 1 CPU core isolated to realtime with isolcpus=1 grub boot parameter. I just did the same for my current build and I am getting latency around 6-7K ns. -- Viesturs If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users