Hi andy: I have change A with Y, interpolation and blending goes really well, with Y axis almost spining at a constant rate. But have to remove all the F words by only at the beginning and change to units/min the feedrate mode, for this. (i asume units dont correlate any more to the actual movement) Seems that my original gcode´s F´s (inverse time) doesnt have a CV continuity or the EMC2 doesnt like that!? I dont have look at the code, but theres a chance that blending isnt working nor implemented, or something else. I think nature of the spatial move come into this If you will run the code for testing, remember to put in AXIS GUI display section GEOMETRY = AXYBC to plot the actual geometry (surely you already know this!) Do you know where to look at the source code? I will look for the hal offset, surely i will find a use for that at time.
Regards Rick 2012/8/22 andy pugh <[email protected]> > On 22 August 2012 17:51, Ricardo Moscoloni <[email protected]> wrote: > > Is an option, but the machine has more joints, like B and C, coordinated > > too, for more complex geometries, varying winding angles, tape width, > > diferent layups patterns, etc, > > OK, in that case you might want to consider using the HAL "Offset" > function for slaved motions. That allows you to move the axes > normally, but to do wierd things with them. (I have used such a system > to bore hexagonal holes using a lathe, for example). > > I am away from my machines until the weekend, so can't check out your > code, but I think that the underlying problem might be that the rotary > axes are not part of the blending algorithm. (this is a guess, as I > haven't checked). > > You could try using Y as your rotary axis. As far as HAL is concerned > they are all just stepgens.. > > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
