I am really glad someone is working on G71/G70 To me G71 is as important on a lathe as G83 is to a mill
Thanks guys Terry ----- Original Message ----- From: Dave Caroline <[email protected]> To: [email protected] Cc: Sent: Sunday, August 26, 2012 2:46 PM Subject: Re: [Emc-users] G71 lathe roughing cycle > > Okuma's Method to work around this used G13 & G14 to define what the > program code would apply to. G13 was for the upper turret, G14 for the lower. > By adding P000xx codes ( "Priority code" ) I suppose we should think of the sliding head lathes that will be looked at in the future I have one "resting" in the garage that needs a large round tuit applying Currently it is a cam auto but would be a nice cnc retrofit project it has 4 tool slides one being a back and forward tool by rocking it has facilities for tooling to be mounted on the front too (I have a screw head slotting attachment) http://www.archivist.info/cnc/works2008b/P1010226.JPG Dave Caroline ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
