Greetings; I see the tool.tbl now has a full complement of XYZ settings.
How can I arrive at a repeatable toolpost vs XYZ measurement such that assuming the toolpost is bolted down dead square, the tool 1 is then normally mounted in a QC holder that would put the cutting point 1" inward and 1" to the left of the toolpost center axis. In other words, what sort of a measuring setup should I use in order to stand a reasonable chance of thousandth inch repeatability. I have considered making a gage where the tool could be pushed up against a stop and tightened down, not to be moved if I had enough toolholders so I could premount every tool style at some point down the road. Obviously I don't have that many holders now, but that might be one way to attack. Comments? Cheers, Gene -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) My web page: <http://coyoteden.dyndns-free.com:85/gene> is up! Between grand theft and a legal fee, there only stands a law degree. ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
