On 05/09/2012 15:24, Peter C. Wallace wrote: > Snip-------------------------------------------------------------------- > >>>>> It seems to sort of work >> 'Sort of work' meaning does not hang the system; I can use the gpio on the >> other channels OK. I am still not able to read or set any of the digital i/o >> on the i65 > If you cannot set DACs or the enable outputs, this suggests that the RESET amd > /ENABLE pins of the 7I65 are not both low (If you have a red LED on this is > the case)
Yes the board is enabled with ENABLE and RESET I can read the analog in and set the enable outs I can not set the analog out or read the misc in pins I'm taking the red led WB LED as the watchdog has bitten: On or off the enable output pins can be controlled regardless of the watchdog. Which should not happed according to the manual. Is the EEPROM on this 7i65 board corrupted? > > Peter Wallace > Mesa Electronics > > ------------------------------------------------------------------------------ > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users