Sam was talking about a classicladder output. You never have more than one output in a ladder logic as the status of the last one wins and that will be the state of the output when they are updated.
John On 10/28/2012 3:38 AM, Viesturs Lācis wrote: > 2012/10/28 Jason Burton <lathebuil...@gmail.com>: >> Crosstalk between spindle power lines and solenoid control lines perhaps? > As it can be seen in that video, it is purely in software. > > 2012/10/28 sam sokolik <sa...@empirescreen.com>: >> I have not had that happen that I know of... Some things to check on >> is if you have enough objects allocated in your hal file.. (ie loadrt >> classicladder_rt numRungs=12 numBits=100 numWords=10 numTimers=10 >> numMonostables=10 numCounters=10 numPhysInputs?=10 numPhysOutputs?=10 >> numArithmExpr?=100 >> numSections=4 numSymbols=200 ...) >> >> Funky things happen when you try to add something and there isn't enough >> allocated.. > I did at least try to check for that. I did run out of IEC Timers, and > I was also informed about that with error message, so I fixed that. > I feel pretty confident that everything should be fine about this. > >> Also - don't have an output (coil) in more than one place.. > Ok, I definitely have violated this one. I have outputs being turned > on by timers or by pyvcp buttons, connected to ladder inputs. A > hardware switch selects it. > > What is the best approach to fix that? Should I simply leave overall > scheme as it is and use internal coils (%Bnn) so that they turn the > real output on/off only in one place? Or should I put all the possible > inputs for certain output in one rung (or two with some internal coil) > and not as they are now - scattered all in different places according > to sequence of how all the things were added. > ------------------------------------------------------------------------------ WINDOWS 8 is here. Millions of people. Your app in 30 days. Visit The Windows 8 Center at Sourceforge for all your go to resources. http://windows8center.sourceforge.net/ join-generation-app-and-make-money-coding-fast/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users