I've wondered the exact same thing. I think about the only thing that might stop you (barring sufficient speeds) is emi crosstalk.
Interested to see you build it! On Nov 6, 2012 6:56 AM, "andy pugh" <[email protected]> wrote: > I have wondered if it would be possible to plasma-cut with my milling > machine. > I am generally dissuaded by the mess. > A water table isn't really an option, as it would slosh as the table moved. > I think I might have thought of a way round both problems. I could > mount an arm off the end of the bed, down to near the floor. I could > then mount a plasma torch to that arm, and put a water tray and the > sheet to be cut on the floor next to the machine. > Any reason that won't work? > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > LogMeIn Central: Instant, anywhere, Remote PC access and management. > Stay in control, update software, and manage PCs from one command center > Diagnose problems and improve visibility into emerging IT issues > Automate, monitor and manage. Do more in less time with Central > http://p.sf.net/sfu/logmein12331_d2d > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ LogMeIn Central: Instant, anywhere, Remote PC access and management. Stay in control, update software, and manage PCs from one command center Diagnose problems and improve visibility into emerging IT issues Automate, monitor and manage. Do more in less time with Central http://p.sf.net/sfu/logmein12331_d2d _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
