2012/11/8 Mark Brown <markbu...@gmail.com>: > Hi all, > > Is there something in the .ini file that will enable the spindle speed to > display on EMC2 for my mill?
Oh yes. Actually there are lots of ways to do it. You can choose between pyvcp and gladevcp panels. Then there are several options to display the speed - simply as a number, as a progress bar, as a dial... Glade panels look so much better, but python panels are easier to set up. Take a look at Integrator's manual, there is a section of VCP examples, there is one of possibilities to display spindle speed on screen. Here is very similar: http://www.linuxcnc.org/docs/2.4/html/hal_pyvcp_examples.html#sec:GS2-RPM-Meter -- Viesturs If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_nov _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
