On Thu, 15 Nov 2012, Ralph Stirling wrote: > The AS5306 magnetic encoder module A and B outputs > will certainly connect to the the parallel port fine. You > can configure Hal to do quadrature decoding from the > parallel port, but your linear stage can't go very fast. > The AS5306 has 40 pulses / 2.4mm = 16.7 pulses/mm. > If I recall correctly, LinuxCNC can typically read maybe > a couple thousand pulses per second from a quadrature > encoder via the parallel port, so you would be limited to > ~100-200mm/sec in speed. >
That is quite adequate ------------------------------------------------------------------------------ Monitor your physical, virtual and cloud infrastructure from a single web console. Get in-depth insight into apps, servers, databases, vmware, SAP, cloud infrastructure, etc. Download 30-day Free Trial. Pricing starts from $795 for 25 servers or applications! http://p.sf.net/sfu/zoho_dev2dev_nov _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users