I've updated my Cheesemill and it still works flawlessly. Thanks!
Great work! On 2013-03-04 17:07, Chris Radek wrote: > No config changes are required when upgrading from 2.5.x to 2.5.2. > > For the typical installation, the update manager will automatically > offer you this upgrade. Otherwise, you can get the packages from > http://linuxcnc.org/dists > > If you're upgrading from a 2.4 release, please see > http://wiki.linuxcnc.org/cgi-bin/wiki.pl?UpdatingTo2.5 > > Many thanks to the people who have reported bugs, and especially to > the folks who worked to improve LinuxCNC for this release: > > Anders Wallin > Andy Pugh > Chris Morley > Chris Radek > Dewey Garrett > Francis Tisserant > Jeff Epler > John Thornton > Jon Elson > Lisandro Massera > Matt Shaver > Michael Haberler > Sascha Ittner > Sebastian Kuzminsky > Victor Rocco > > This release contains the following changes: > > * AXIS: Allow the setting of the top end of the Max Velocity slider > according to [DISPLAY]MAX_LINEAR_VELOCITY as the docs say > * Components: Fix mux16's debounce function > * Components: LCD character display driver > * Components: New multiclick component detects single, double, triple clicks > * Docs: Many improvements > * Gremlin: Better error reporting for gcode errors > * Gremlin: Fix rotated axes display > * Halui: Include tool length offsets in relative position outputs > * Hostmot2: Fixes to sserial > * Kins: Fix teleop jogging of ABC axes in the negative direction > * Modbus: Fix TCP communication time out error > * New config: Gecko G540 > * New config: Smithy 1240combined_mm > * PID: Optional new error-previous-target mode to reduce ferrors detected > by motion. This is especially useful for torque-mode loops and those > tunings that use large I gains > * pncconf: Many fixes > * PPMC: Better error checking for hardware problems causing miscommunication > * Tool Table: Many fixes to tool table handling, making tool tables on > nonrandom setups using mismatched tool and pocket numbers work correctly > * Translations: German for tooledit > * Translations: Many improvements to French > * Utilities: new latencyhistogram program that shows details about latency > * Utilities: sim_pin, a script that simulates writing to hal pins > > ------------------------------------------------------------------------------ > Everyone hates slow websites. So do we. > Make your web apps faster with AppDynamics > Download AppDynamics Lite for free today: > http://p.sf.net/sfu/appdyn_d2d_feb > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users -- "In der Wissenschaft siegt nie eine neue Theorie, nur ihre Gegner sterben nach und nach" Max Planck ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_feb _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
