As others have said the TB6550 is a marginal board but there is a sample config on the forum for it.
http://linuxcnc.org/index.php/english/forum/49-basic-configuration/26211-sample-configurations John On 4/12/2013 9:42 PM, Gregg Eshelman wrote: > Driver board, 4 motors and power supply. DB25 for parallel port, looks like a > DE9 for limit switches and e-stop, third connector for manual control unit. > > http://www.ebay.com/itm/200592694416 > > Going to do the cable drive on the pattern follower torch, need something > that'll work with LinuxCNC. After spending the big $ on the Dragon-Cut with > Mach3 for the plasma table... Time to save some coin on this torch project. > > Also need to find out how to setup LinuxCNC for a 4 axis cable drive. May as > well go with 4 to ensure the torch position is always solidly controlled > instead of depending on weights or springs to keep it tight. > > ------------------------------------------------------------------------------ > Precog is a next-generation analytics platform capable of advanced > analytics on semi-structured data. The platform includes APIs for building > apps and a phenomenal toolset for data science. Developers can use > our toolset for easy data analysis & visualization. Get a free account! > http://www2.precog.com/precogplatform/slashdotnewsletter > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Precog is a next-generation analytics platform capable of advanced analytics on semi-structured data. The platform includes APIs for building apps and a phenomenal toolset for data science. Developers can use our toolset for easy data analysis & visualization. Get a free account! http://www2.precog.com/precogplatform/slashdotnewsletter _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
