Jon Elson wrote: > > But, he also had a Siig parallel port card, and I could not > get this to do anything at all. I can't even get signals to > wiggle when observing with a scope. > Well, I must have locked it up with an EPP timeout or something. This morning I fired it up and the Siig card worked pretty much as expected, except that the extended control reg. to set it to EPP mode was at a different address than the customary base address + 0x402. Works fine with EMC2 2.4.6 except it keeps going back to Estop after a couple seconds.
Jon ------------------------------------------------------------------------------ Try New Relic Now & We'll Send You this Cool Shirt New Relic is the only SaaS-based application performance monitoring service that delivers powerful full stack analytics. Optimize and monitor your browser, app, & servers with just a few lines of code. Try New Relic and get this awesome Nerd Life shirt! http://p.sf.net/sfu/newrelic_d2d_apr _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users