Speak of the devil...? http://www.cnczone.com/forums/general_electronics_discussion/178760-poll_treadmill_motors_information_wanted.html
sam On 04/30/2013 12:16 PM, Gene Heskett wrote: > On Tuesday 30 April 2013 13:15:33 andy pugh did opine: > >> On 30 April 2013 16:56, Cecil Thomas <wctho...@chartertn.net> wrote: >>> These 1 1/2 to 2 hp motors develop that hp at 5000 to 6000 rpm. You >>> will have to rethink your drive coupling system to reduce that speed >>> down to something usable especially for threading. >> Which is why I fancy experimenting with this: >> https://plus.google.com/photos/108164504656404380542/albums/574772215574 >> 1347649/5832689638364145858?banner=pwa > Kewl Andy. What car was that headed for? > > Cheers, Gene ------------------------------------------------------------------------------ Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET Get 100% visibility into your production application - at no cost. Code-level diagnostics for performance bottlenecks with <2% overhead Download for free and get started troubleshooting in minutes. http://p.sf.net/sfu/appdyn_d2d_ap1 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users