Hi Andy, thanks for you reply. > 5i23 is cheaper.
That's a 400k FPGA right? I recently stated some FPGA experiments on a Xilinx dev. board. So I would have a lot of ideas for the FPGA on the card, but will probably never find the time, so I guess I wont need 1.5 M gates. > It isn't well documented. But I can give you a sample configuration. > (I am using 5i23 + 7i39 myself) Oh that would be a good start. Cool. Thanks. I was not able to find much on where the FPGA code comes from. Is it the MESA firmware or dose LinuxCNC load a dedicated firmware? Do you have any idea what might be a practical solution to integrate the forth axis via some kind of radio link, WLAN at best? cu Flo ------------------------------------------------------------------------------ Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET Get 100% visibility into your production application - at no cost. Code-level diagnostics for performance bottlenecks with <2% overhead Download for free and get started troubleshooting in minutes. http://p.sf.net/sfu/appdyn_d2d_ap1 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
