Some more digging shows it must be an earlier version of the Proxxon 24106 compound table.
--- On Fri, 5/31/13, John Alexander Stewart <[email protected]> wrote: > From: John Alexander Stewart <[email protected]> > Subject: Re: [Emc-users] A question for the Unimat owners. > To: "Enhanced Machine Controller (EMC)" <[email protected]> > Date: Friday, May 31, 2013, 4:10 AM > Gregg; > > The Emco Compact 5 head used to have a table like this for > doing as you > say. (take head off of lathe and put it on an x/y table) > > The colour looks like it's from Proxxon; (Proxon??) > > The issue with these Emco/Unimat heads is the lack of Z > depth setting, etc. > > > On Fri, May 31, 2013 at 5:14 AM, Gregg Eshelman <[email protected]> > wrote: > > > Is this an X-Y mill base for a Unimat mill column? > Would make a much nicer > > mill than mounting the headstock on the column over the > lathe bed. > > > > http://www.PartsByEMC.com/pub/unimat > > > > The table is 10-5/8" long. > > > > > > > ------------------------------------------------------------------------------ > > Get 100% visibility into Java/.NET code with > AppDynamics Lite > > It's a free troubleshooting tool designed for > production > > Get down to code-level detail for bottlenecks, with > <2% overhead. > > Download for free and get started troubleshooting in > minutes. > > http://p.sf.net/sfu/appdyn_d2d_ap2 > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------------------------ > Get 100% visibility into Java/.NET code with AppDynamics > Lite > It's a free troubleshooting tool designed for production > Get down to code-level detail for bottlenecks, with <2% > overhead. > Download for free and get started troubleshooting in > minutes. > http://p.sf.net/sfu/appdyn_d2d_ap2 > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite It's a free troubleshooting tool designed for production Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://p.sf.net/sfu/appdyn_d2d_ap2 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
