On 10 June 2013 23:49, Viesturs Lācis <viesturs.la...@gmail.com> wrote:
> Currently it has spindle motor with ER20 collet at the end of motor shaft. > I searched the web for some kind of upgrade kits, but all I could find was > for Kress motors. I think that it might be difficult to engineer. I might have seen something, but I don't know how good it would be. Typically ATCs have a through-shaft actuator of some sort. It is difficult to see how that could be implemented with an ER20 collet spindle. Is swapping the spindle to an ATC version a possibility? http://www.aliexpress.com/item/ISO20-atc-spindle-for-machining-center/928633055.html There is a system here that uses a modified router. (looks to have a pin running down the middle of the router shaft) http://www.midwestrapidtool.com I can imagine it might be possible to come up with a system that simply screws into an ER20 collet and offers a different interface, but it would be a challenge. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
