I meant - the spindle drive looks like it uses 3 similar cards. (hooked togather with ribbon cable..) It is the 3 cards in the center of the rack.
On 7/25/2013 10:28 AM, sam sokolik wrote: > We just got an acroloc which has a general numerics control. It is > using siemens drives. > > 6sc6120-0fe00 > > The servo drive uses what looks like 3 of similar circuit boards. > > http://imagebin.org/index.php?mode=image&id=265521 > > wondering if anyone has any info on these drives.. > > > servos.. > http://imagebin.org/index.php?mode=image&id=265484 > > Spindle motor > http://imagebin.org/index.php?mode=image&id=265571 > > thanks > sam > > > > ------------------------------------------------------------------------------ > See everything from the browser to the database with AppDynamics > Get end-to-end visibility with application monitoring from AppDynamics > Isolate bottlenecks and diagnose root cause in seconds. > Start your free trial of AppDynamics Pro today! > http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ See everything from the browser to the database with AppDynamics Get end-to-end visibility with application monitoring from AppDynamics Isolate bottlenecks and diagnose root cause in seconds. Start your free trial of AppDynamics Pro today! http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
