On Mon, 8/5/13, Kirk Wallace <kwall...@wallacecompany.com> wrote: You will also need to close the feedback loop in LinuxCNC. I don't recall anyone using a tachometer signal with LinuxCNC, but I can't see that it would be too difficult. A quadrature encoder would also work.
------------- If there's a way to use the tachometers along with the glass scales to improve accuracy over just using the scales... I'm hoping the scales are all good. They'll be getting flushed with Simple Green, rinsed with water then dried. That worked on an oil contaminated Anilam glass scale on a Bridgeport of about this same vintage. I called Acra yesterday and they told me the serial number starting with 79 meant it was made in 1990. Not quite as old as I thought. ------------------------------------------------------------------------------ Get your SQL database under version control now! Version control is standard for application code, but databases havent caught up. So what steps can you take to put your SQL databases under version control? Why should you start doing it? Read more to find out. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
