I wired enable input correctly and measured the voltage between en- and en+ with multimeter - they get 0 or 12V depending on LinuxCNC power state.
On 08/07/2013 12:43 AM, andy pugh wrote: > I am not sure about the rest, but because the enable inputs are > separate, they need to be driven by GPIO rather than anything that the > driver sends down the serial link. ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
