JT What is the correct way to calculate the drill sizes please. I will do the metric table but I just need to know what is the right way.
On 2013/08/13 04:30 PM, John Thornton wrote: > Oh I forgot to mention I converted the first line of each type of tap as > an example. > > JT > > On 8/13/2013 9:03 AM, Dave wrote: >> Very nice John.. >> >> Dave Cole >> >> On 8/13/2013 9:32 AM, John Thornton wrote: >>> I know most of you guys on the mailing list don't visit the forum so >>> here is a link to a G code generator for drilling and tapping holes on a >>> mill. I wrote this mainly because we don't have a tapping cycle and if I >>> forgot the pre-position move then you get a really neat show as your tap >>> traverses from where it is to the bottom of the hole. Anyone ever seen a >>> tapped slot? >>> >>> This saves me time when I need to tap some holes in a part and helps >>> prevent errors. >>> >>> http://linuxcnc.org/index.php/english/forum/31-cad-cam/26859-mill-tapping-g-code-generator >>> >>> JT >>> >>> ------------------------------------------------------------------------------ >>> Get 100% visibility into Java/.NET code with AppDynamics Lite! >>> It's a free troubleshooting tool designed for production. >>> Get down to code-level detail for bottlenecks, with<2% overhead. >>> Download for free and get started troubleshooting in minutes. >>> http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk >>> _______________________________________________ >>> Emc-users mailing list >>> Emc-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/emc-users >>> >>> >> ------------------------------------------------------------------------------ >> Get 100% visibility into Java/.NET code with AppDynamics Lite! >> It's a free troubleshooting tool designed for production. >> Get down to code-level detail for bottlenecks, with <2% overhead. >> Download for free and get started troubleshooting in minutes. >> http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ > Get 100% visibility into Java/.NET code with AppDynamics Lite! > It's a free troubleshooting tool designed for production. > Get down to code-level detail for bottlenecks, with <2% overhead. > Download for free and get started troubleshooting in minutes. > http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Regards / Groete Marius D. Liebenberg MasterCut cc Cel: +27 82 698 3251 Tel: +27 12 743 6064 Fax: +27 86 551 8029 Skype: marius_d.liebenberg --- avast! Antivirus: Outbound message clean. Virus Database (VPS): 130813-1, 2013/08/13 Tested on: 2013/08/14 12:34:50 PM avast! - copyright (c) 1988-2013 AVAST Software. http://www.avast.com ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
