On Mon, 30 Sep 2013, Leonardo Marsaglia wrote:
> Date: Mon, 30 Sep 2013 14:33:34 -0300
> From: Leonardo Marsaglia <[email protected]>
> Reply-To: "Enhanced Machine Controller (EMC)"
> <[email protected]>
> To: "Enhanced Machine Controller (EMC)" <[email protected]>
> Subject: Re: [Emc-users] Parport driver max expected frequency
>
> Hello Jon and thanks for the quick answer.
>
> I was affraid that it would be on the limit. I guess I'm going to use a
> 5i20 to read it. I have one machine using it so I can test it with the TTL
> encoder and see how it works.
>
> Do you know if the 6i25 is already supported by LinuxCNC? I know that
> hostmot 2 works with it, but I don't know if there is support for that
> particular card on LinuxCNC.
>
Yes the 6i25 is supported (it normally has 5I25 firmware installed so looks
like a 5I25)
> Leonardo.
>
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance.
Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from
the latest Intel processors and coprocessors. See abstracts and register >
http://pubads.g.doubleclick.net/gampad/clk?id=60134791&iu=/4140/ostg.clktrk
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
