On 11/01/2013 07:07 AM, Eric Keller wrote: > On Fri, Nov 1, 2013 at 9:18 AM, andy pugh <bodge...@gmail.com> wrote: >> >> I don't understand? (Unless you are looking at the wrong scale?) > > > I had to stare at that picture 3 times to see the scale on the top > toolholder. Not sure how to solve your problem though
... snip I think the markings would be on the circumference of a cylinder, similar to this: http://home.scarlet.be/mini-draaien-frezen/images/07-draaitafel/puncher.jpg The scale lines should be easy. Engraving the numbers should be easy if a flat numeral is acceptable on the curved surface. -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/ ------------------------------------------------------------------------------ Android is increasing in popularity, but the open development platform that developers love is also attractive to malware creators. Download this white paper to learn more about secure code signing practices that can help keep Android apps secure. http://pubads.g.doubleclick.net/gampad/clk?id=65839951&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users