Well that is neat but the plans are only in the Home Shop Machinest and you can't get the plans as Vol. 31 No. 1 of HSM is not offered in the back issues section.
JT On 11/5/2013 1:35 PM, Kenneth Lerman wrote: > A friend of mine, John Moran has been working on drill sharpeners for > the home shop for many years. See: > http://www.gadgetbuilder.com/DrillSharp.html for a great article on the > subject. > > If you have any questions, I'm sure John would be happy to answer them. > > Regards, > > Ken > > > On 11/4/2013 8:12 PM, Gene Heskett wrote: >> On Monday 04 November 2013 20:10:50 Gregg Eshelman did opine: >> >>> On 11/4/2013 7:53 AM, Gene Heskett wrote: >>>> Hell, I'd pay >>>> another $200 for a Drill Doctor that could do a 1/16" bit RIGHT. But >>>> that beast isn't made, the drill bits, sloppy as they are, are too >>>> cheap to be a target for the DD. Dammit. >>> Buy one of the sharpeners from Darex, the company that makes the Drill >>> Dr. >> Nice try, but the base line $1,450 model only goes down to 1/8". And I did >> say +$200, not +1,200. ;-) >> >> Cheers, Gene > ------------------------------------------------------------------------------ > November Webinars for C, C++, Fortran Developers > Accelerate application performance with scalable programming models. Explore > techniques for threading, error checking, porting, and tuning. Get the most > from the latest Intel processors and coprocessors. See abstracts and register > http://pubads.g.doubleclick.net/gampad/clk?id=60136231&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ November Webinars for C, C++, Fortran Developers Accelerate application performance with scalable programming models. Explore techniques for threading, error checking, porting, and tuning. Get the most from the latest Intel processors and coprocessors. See abstracts and register http://pubads.g.doubleclick.net/gampad/clk?id=60136231&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
