On 6 November 2013 22:14, Dave Cole <linuxcncro...@gmail.com> wrote: > That is a sweet setup you have Andy... That hob does not look cheap..
eBay, £35. > The problem with the Bell Everman drive setup is that by the time you > cut the belt engagement grooves in the mating surface ... > I saw another setup where they glued a belt to the mating surface to > create the rack.. but I can see a lot of problems with that.. The belt-glued-to-the frame version was what I had in mind. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ November Webinars for C, C++, Fortran Developers Accelerate application performance with scalable programming models. Explore techniques for threading, error checking, porting, and tuning. Get the most from the latest Intel processors and coprocessors. See abstracts and register http://pubads.g.doubleclick.net/gampad/clk?id=60136231&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users