Why limit your design to a tool holder? Make it a 3/4" shaft so any tool holder can hold it. Of course if it was a popular design you would think that the market would be flooded with cheap Chinlee versions.
JT On 2/3/2014 2:21 AM, Gregg Eshelman wrote: > On 2/2/2014 5:50 PM, a k wrote: >> Hi >> i found that this and many other companies manufacture 3D printer >> http://indimension3.com/our-3d-printers >> They also manufacture head that attached to basically 3d CNC 3 axis mill. >> So, question is why not just manufacture head as a another tool to CNC mill >> on the CAT 40 or CAT 50 tool holder? > Make it in R8 and NMTB30, especially with an Erickson QC flange + > drawbar threads, and it'd fit the vast majority of Bridgeport knee mills > and clones. > > > ------------------------------------------------------------------------------ > Managing the Performance of Cloud-Based Applications > Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. > Read the Whitepaper. > http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
