> Date: Wed, 5 Feb 2014 00:10:15 -0800
> From: m...@matws.net
> To: emc-users@lists.sourceforge.net
> Subject: [Emc-users] Address in of parrallel port not used in PNCCONF ?
>
> Hello All,
>
> I have an atom desktop with a partport at 0x378 and a 7i43 + 7i42 hooked
> to it and it's working well with LinuxCNC 2.5.3.
> On a thinkpad laptop I have a PCMCIA parport card at 0x3bc and when I
> try to run Axis, after configuring this laptop for the same card, I got
> errors about missing card at address 0x378 even though I configured it
> to 0x3BC.
>
> Did I miss something or is the port specified during PNCConf ignored ?
>
> Matthieu.
>
You didn't miss anything. The address is being ignored by pncconf.
This is a bug.
I will try to remember to look into it further,
Thanks
Chris M
------------------------------------------------------------------------------
Managing the Performance of Cloud-Based Applications
Take advantage of what the Cloud has to offer - Avoid Common Pitfalls.
Read the Whitepaper.
http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
