I saw that but you where quicker on the draw:) If you did not choose counter bore it would give a null value error. If you did the calculation on the bore tab it would go away. Was it that one? On 2014-02-20 16:22, John Thornton wrote: > Give me a moment, I just spotted an error with the counterbore... > > JT > > On 2/20/2014 7:59 AM, Marius Liebenberg wrote: >> Never mind I'll just use the Linux box. It work very well on that. >> Thanks John >> >> On 2014-02-20 15:49, Marius Liebenberg wrote: >>> This one is on Windoze >>> >>> On 2014-02-20 15:44, John Thornton wrote: >>>> I'm on 10.04 and Python version is 2.6.5. >>>> >>>> Run from a terminal and let me know the error msg. Dunno if I can fix it >>>> or not... >>>> >>>> JT >>>> >>>> On 2/20/2014 7:32 AM, Marius Liebenberg wrote: >>>>> Hi John >>>>> I had to rebuild my laptop so now I am on Python 3.3 and there seem to >>>>> be issues. What is the version that I should use rather? >>>>> >>>>> On 2014-02-20 14:59, John Thornton wrote: >>>>>> Hey Gene and anyone else, >>>>>> >>>>>> I added counterbore to my mill G code generator in version 1.6.0. >>>>>> >>>>>> http://gnipsel.com/files/g-code-generator/ >>>>>> >>>>>> Any feed back is appreciated. >>>>>> >>>>>> JT >>>>>> >>>>>> ------------------------------------------------------------------------------ >>>>>> Managing the Performance of Cloud-Based Applications >>>>>> Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. >>>>>> Read the Whitepaper. >>>>>> http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.clktrk >>>>>> _______________________________________________ >>>>>> Emc-users mailing list >>>>>> Emc-users@lists.sourceforge.net >>>>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>>>> >>>> ------------------------------------------------------------------------------ >>>> Managing the Performance of Cloud-Based Applications >>>> Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. >>>> Read the Whitepaper. >>>> http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.clktrk >>>> _______________________________________________ >>>> Emc-users mailing list >>>> Emc-users@lists.sourceforge.net >>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>> > > ------------------------------------------------------------------------------ > Managing the Performance of Cloud-Based Applications > Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. > Read the Whitepaper. > http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users >
-- Regards /Groete Marius D. Liebenberg +27 82 698 3251 +27 12 743 6064 ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
