Hi Andy, Yes. That was causing the error. Didn't know too much about those changes. Also, you're right, the old version installed on this computer was 2.3.X.
Thanks for helping me out! Leonardo. 2014-02-26 7:14 GMT-03:00 andy pugh <[email protected]>: > On 26 February 2014 02:29, Leonardo Marsaglia > <[email protected]> wrote: > > libnml/buffer/physmem.cc 143: PHYSMEM_HANDLE: Can't write 11592 bytes at > > offset 60 from buffer of size 10208. > > See > http://wiki.linuxcnc.org/cgi-bin/wiki.pl?UPDATING#Changes_between_2_3_x_and_2_4_x > section 1.1 > > It looks like you need to remove the NML file reference from the INI. > (though that was a 2.3 to 2.4 change) > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > Flow-based real-time traffic analytics software. Cisco certified tool. > Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer > Customize your own dashboards, set traffic alerts and generate reports. > Network behavioral analysis & security monitoring. All-in-one tool. > > http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > -- *Leonardo Marsaglia*. ------------------------------------------------------------------------------ Flow-based real-time traffic analytics software. Cisco certified tool. Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer Customize your own dashboards, set traffic alerts and generate reports. Network behavioral analysis & security monitoring. All-in-one tool. http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
