That doesn't seem right - I don't think anything you send linuxcnc in gcode should cause a following error.. (unless the configuration is setup wrong..) On 3/7/2014 7:12 AM, Mark Wendt wrote: > On Fri, Mar 7, 2014 at 7:38 AM, John Thornton <bjt...@gmail.com> wrote: > > <snippage> > > >> Does anyone have any ideas about how to calculate the F word? >> >> Thanks >> JT >> > Sorry John, I just had to have a chuckle about that... ;-) > > Mark > ------------------------------------------------------------------------------ > Subversion Kills Productivity. Get off Subversion & Make the Move to Perforce. > With Perforce, you get hassle-free workflows. Merge that actually works. > Faster operations. Version large binaries. Built-in WAN optimization and the > freedom to use Git, Perforce or both. Make the move to Perforce. > http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > >
------------------------------------------------------------------------------ Subversion Kills Productivity. Get off Subversion & Make the Move to Perforce. With Perforce, you get hassle-free workflows. Merge that actually works. Faster operations. Version large binaries. Built-in WAN optimization and the freedom to use Git, Perforce or both. Make the move to Perforce. http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
