The Borg Collective of LinuxCNC must be busy ... so only one mind is responding via this email...;-)
40 gigs is plenty. I think you will find that after you install everything you can think, and do a git clone to setup a RIP, you will still have way over 30 gigs of drive space left. Dave On 3/27/2014 9:33 PM, Greg Bentzinger wrote: > Hello Hive mind of LCNC; > > My question tonite is how much hard drive space is needed with a 10.04 > install then getting all the other source files, compilers etc. so that I > could do a make and install master as RIP. > > System has a 40 GB hdd, Installed 10.04 from CD then LCNC via script. No > extras that I know of. (did this install last summer) and the box has just > been sitting here collecting dust. > > Between battling doctors (spent the holidays and watched the ball drop from > hospital bed), battle of the budget (did I mention Doctors?), battle with my > machine iron etc. I have been feeling a bit beat up. > > I figure now was a good time to practice fighting code gremlins and getting > my build/make/config skills into shape since I have nothing to loose but my > pride and a few pennies worth of AC power. > > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users