G0 P0.05 worked like a charm! Thanks Viesturs. I'll have to go read the code to understand the behaviour.
On Fri, Apr 11, 2014 at 4:16 PM, Rod Fitzsimmons Frey <[email protected]>wrote: > Perhaps I'm confused about G64? From the docs: > > G64 is just blending and the naive cam detector is not enabled. G64 and > G64 P0 tell the planner to sacrifice path following accuracy in order to > keep the feed rate up. ... G64 P0 has the same effect as G64 alone > (above), which is necessary for backward compatibility for old G Code > programs. > > I'll try the small value for G64 instead. I'm not concerned about > accuracy in this application - .005" would be fine. > > I'll definitely have a look at the new trajectory planner too! > > > On Fri, Apr 11, 2014 at 3:28 PM, Viesturs Lācis > <[email protected]>wrote: > >> 2014-04-11 22:15 GMT+03:00 Rod Fitzsimmons Frey <[email protected]>: >> >> > I've set G64 P0, which I think should eliminate motion mode concerns? >> >> >> P0 means that max allowed deviation from defined path in order to maintain >> velocity is equal to as much as total zero, so it really eliminates not >> only concerns about motion mode, but also any options to try to maintain >> the velocity. Try increasing it to something like 0,02 and see, if it is >> better. >> >> I would say that this particular case is a perfect guinea pig for the new >> trajectory planner :) >> >> Viesturs >> >> ------------------------------------------------------------------------------ >> Put Bad Developers to Shame >> Dominate Development with Jenkins Continuous Integration >> Continuously Automate Build, Test & Deployment >> Start a new project now. Try Jenkins in the cloud. >> http://p.sf.net/sfu/13600_Cloudbees >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > ------------------------------------------------------------------------------ Put Bad Developers to Shame Dominate Development with Jenkins Continuous Integration Continuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud. http://p.sf.net/sfu/13600_Cloudbees _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
