Haas uses electric stove elements. I suppose they had an engineer sit down for 10 minutes to figure out the resistance. They will certainly take a significant amount of wattage
On Thu, Apr 17, 2014 at 9:56 AM, Viesturs Lācis <viesturs.la...@gmail.com>wrote: > Hello! > > I have three chinese servo drives in the waterjet machine and they are > constantly faulting with "overvoltage" error. Since I have not yet added > any braking resistors, it seems obvious that I should do so. > The question is: how do I determine appropriate resistance and rated power > values for the resistor? > Motor parameters are here: > http://www.cutting.lv/fileadmin/user_upload/tg-motor.pdf > > Currently max current in motors is set to 1,4A, which makes me think that > actual motor power is 500W. > Experienced guy suggested braking resistor with 100-150 ohm resistance. But > how do I determine correct rated power? Or is it that I just take the > biggest power available as it cannot be too high? > > Viesturs > > ------------------------------------------------------------------------------ > Learn Graph Databases - Download FREE O'Reilly Book > "Graph Databases" is the definitive new guide to graph databases and their > applications. Written by three acclaimed leaders in the field, > this first edition is now available. Download your free book today! > http://p.sf.net/sfu/NeoTech > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Learn Graph Databases - Download FREE O'Reilly Book "Graph Databases" is the definitive new guide to graph databases and their applications. Written by three acclaimed leaders in the field, this first edition is now available. Download your free book today! http://p.sf.net/sfu/NeoTech _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
