Eric I'm using Axis 2.6.0 pre0 should I upgrade to latest. The Update manager wont update says linuxcnc untrusted source.
Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] Next question, do you know what video driver is being used? I had no problem on my computer with 10.04, but 12.04 had all sorts of problems. Turned out to be the video driver. Went to Vesa and no issues since. On Mon, Apr 28, 2014 at 10:47 AM, Eric Keller<eekel...@psu.edu> wrote: > Are you running 32 bit? > > > On Sat, Apr 26, 2014 at 3:09 PM, JohnBannister < > john-bannis...@talktalk.net> wrote: > >> I am getting a RTAPI error running 2.6 on Precise. The error occurs >> when another program is started. >> >> I've been using this computer with no problem with 10.4 and linuxcnc 2.4 >> with no problems and a similar computer with Lubuntu Quantal and 2.5.4 >> and this is currently running my Gantry mill again with no problems. >> The computer is a old RM with a celeron 3060 cpu and 1024 RAM with >> onboard graphics. >> Servo Thread 24909 Base 25261 with 3 youtube videos running. >> Is it that my computer is not fast enough for precise. >> >> Regards John ------------------------------------------------------------------------------ "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available. Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
