Does anybody have any experience with the machine listed below? These are all of the specs that I have so far:
Manufacturer: CNC Cutting Solutions (Canada) Make: PLASCUTTER 6x12 Model: PLZ6X12 Serial: 0519 Drives: Stepper (Unknown types) Controllers: Gecko (Unknown types) Software: Mach2 on WinXP CAD/CAM: BobCAD A company south of me has a plasma cutter that is currently not working. The machine itself is still in good working order, and the drives can be moved manually, but the original computer died, and all of the settings for the machine went with it. I was told that the manufacturer of the machine is out of business, so there is no easy way to get them back again. The company is interested in converting it to LinuxCNC, if they can find a working solution. It looks like is should be a fairly straightforward conversion, and mostly they are seeking somebody that has a similar setup, with a set of working config files. Any additional information about running it on LinuxCNC would also be appreciated. -- MC Cason Associate Developer - Eagle3D, Created by Matthias Weißer ------------------------------------------------------------------------------ Is your legacy SCM system holding you back? Join Perforce May 7 to find out: • 3 signs your SCM is hindering your productivity • Requirements for releasing software faster • Expert tips and advice for migrating your SCM now http://p.sf.net/sfu/perforce _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
