On 14 May 2014 20:00, a k <pccncmach...@gmail.com> wrote: > we talk about board THCAD-10 to convert 0 =5 V into signal that will be > connected to A signal of encoder on emc2. > why do i need encoder?
If you want an adjustable knob as an input to LinuxCNC then an encoder is easier. You haven't said what the source of your 0-5V is. If it is from a knob and potentiometer then the encoder is easier and much cheaper. If the control voltage isn't from a hand-control then the encoder isn't the answer. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
