On Sat, 2014-05-31 at 13:02 -0400, Pete Matos wrote: > Lennox blades are hard to beat. I run them in my horizontal vertical 12 > inch saw and it cuts beautiful and lasts awhile unless I screw up and get > it stuck in some tube or something. I get them from my local welding > supply house. they cost about $20.00 each. Variable pitch blades are nice > too. Good luck man.. > > Pete > > > > On Sat, May 31, 2014 at 12:55 PM, Kirk Wallace <kwall...@wallacecompany.com> > wrote: > > > I haven't bought bandsaw blades for many years so I don't have a known > > good source. Does anyone have a favorite source for 93" x .032" x 3/4" > > steel cutting blades? > > -- > > Kirk Wallace > > I'll second that on the variable pitch (multi-pitch) blades. Run them in correctly and they last a long.... time. My saw takes blades about 1/2" longer than standard so I have them custom made.
Dave > > ------------------------------------------------------------------------------ > > Time is money. Stop wasting it! Get your web API in 5 minutes. > > www.restlet.com/download > > http://p.sf.net/sfu/restlet > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------------------------ > Time is money. Stop wasting it! Get your web API in 5 minutes. > www.restlet.com/download > http://p.sf.net/sfu/restlet > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Time is money. Stop wasting it! Get your web API in 5 minutes. www.restlet.com/download http://p.sf.net/sfu/restlet _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users